Images all the way.ViSCO Technologies Corporation

Images all the way.ViSCO Technologies Corporation

Boundary/Burr/Chip Inspection
Detection of Defects Based on the Distance
in a Straight Line Between Edges

This method is effective when you want to inspect the width between two
points or two straight lines.
The distance between the maximum and minimum edge points can also be used as a judgment value.

Are you struggling with problems like these?

Detection is difficult
due to the
unevenness
of shades
and gradations.
Detection is difficult
because it's impossible
to distinguish
reflections
from scratches.
It's difficult to set up the
lighting conditions
because the inspection
target is round.
ViSCO Technologies can help!

Defects are detected based on the distance from an ideal straight line.

●Straight line boundary (datum (reference) line distance) defects
●Two-straight-line width (detection width) defects
●Inspections of one side are also possible
●Repeated straight-line boundary inspections



Introduction to our company

As an expert group in the field of visual inspections and image processing inspections, we provide products that continue to lead the industry.

We are an expert group in the field of visual inspections and image processing inspections. We are not just a manufacturer. Instead, we are a visual inspection and image processing inspection system manufacturer that combines knowledge of and experience related to image processing algorithms, optical technology, electronics, and machinery in order to provide comprehensive consulting as a development engineering company.

Inquiries / Support
Please feel free to contact us with any questions or concerns related to our various products.
Contact us by phone
+1-773-332-3775
Contact us on the web
InquiriesYou can send inquiries to us here
Support HotlineYou can send technical inquiries to us here

Contact Us・Related Information

このページの先頭へ